Subject: Lake in WEAP Posted: 3/30/2010 Viewed: 41273 times
Dear All
How can i model a man made lake that is fulled by diversions of a river in the non-irrigation seasons and is used in irigation seasons?
Thanks
Mr. Jack Sieber
Subject: Re: Lake in WEAP Posted: 3/30/2010 Viewed: 41263 times
Have a diversion coming off the main river, with a reservoir on the diversion. Upstream of the reservior, place a Flow Requirement. Decide how much you want to divert to the reservoir in the non-irrigation season and set that as the value for the flow requirement in those months. Give the Flow Requirement a lower priority than other demands so that it will only divert surplus water.
Mr. mohsen mousavi
Subject: Re: Lake in WEAP Posted: 7/24/2010 Viewed: 40910 times
Hi Lale iam mohsen mousavi and i work on a marooon basin and i simulate 5 dams in this system and i woundernig if you can help me with this imean to simulate the grounwater in this system.
best regards
Mohsen
Dr. Mehdi Mirzaee
Subject: Re: Lake in WEAP Posted: 9/10/2010 Viewed: 40715 times
Laleh,
Generally you can not make a Lake (sink) in WEAP, but you could make a reservoir. Although, your object is not Lake, we say it in Farsi (Ab gir)... isn't it? And it seems that you are working in a project in North part of Iran?!
It doesn't make any difference that how you fill it. As Jack said, you have to fill it by a diversion. But it's sometimes tricky!! when you run it, you will get it! Just note to priorities of your system.
Cheers,
Dr. Mehdi Mirzaee
Subject: Re: Lake in WEAP Posted: 9/10/2010 Viewed: 40712 times
Mohsen,
I don't know what do you want to do with Groundwater in Maroon basin, and I do not know that it's a consulting matter or just a research for your thesis and...
Anyway... If you need help, let me know.
Have Fun
Eng. Theoneste Uhorakeye
Subject: Re: Lake in WEAP Posted: 11/6/2012 Viewed: 35756 times
Similarly to what Miss Mahmoudian asked, I would like to know how WEAP models the effects of lake level drops to the downstream runoff rivers that flow from the lake.
Regards,
Theoneste
Dr. Mehdi Mirzaee
Subject: Re: Lake in WEAP Posted: 11/6/2012 Viewed: 35750 times
There is no Sink or Lake feature in WEAP, but you can use reservoir. Once you use reservoir feature, you can control and define water level in the lake and flow in downstream just by some simple rule. To define them, you can use expression builder functions (like IF rules or any appropriate things).
Cheers
Eng. Theoneste Uhorakeye
Subject: Re: Lake in WEAP Posted: 11/6/2012 Viewed: 35746 times
Thank you very much, that works well.
Theoneste
Mr. Koppuravuri Ramabrahmam
Subject: Re: Lake in WEAP Posted: 11/29/2019 Viewed: 15142 times
Dear Mehdi and Jack,
as you said the lake can be featured as reservoir then, my question is, if i have cascade lakes then if i want to simulate the runoff in that lakes? and these are falling under sub-tributary to a near river.